Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now


Theory Audio Design Now Shipping All Weather Multi-Use Loudspeaker

The sb25aw incorporates a perforated stainless-steel grille, water-tight loudspeaker wire entry point, and selectable hi-z or low-z operating modes.

Theory Audio Design is now shipping the sb25aw — a 4-ohm or 70V/100V version of the company’s sb25 surface-mount loudspeaker. The all-aluminum and stainless steel sb25aw is fully weatherized and offers mounting options to meet every possible installation need, including porches, patios, pool decks, backyards, restaurants, bars, hotels, houses of worship, marine, and anywhere high-resolution, high-fidelity background or foreground sound is needed.

Theory Audio Design sb25aw All-Weather Speaker

The sb25aw incorporates a durable perforated stainless-steel grille, water-tight loudspeaker wire entry point, and selectable hi-z or low-z operating modes. Its slender enclosure, premium finish, and gentle sculpted curves allow it to virtually disappear into the architectural background while looking surprisingly handsome in environments where it’s easily seen — stealth and pretty at the same time.

The sb25aw ships with z-clips for flat-to-wall mounting and the back panel has integral mount hole patterns for several high-quality third-party speaker mounts. An optional surface and pole-mountable yoke mounting bracket is also available. A tabletop stand accessory allows the sb25aw to stand up on flat surfaces such as speaker stands, mixing desks, consoles, tabletops, and bookshelves both horizontally and vertically. With available optional Universal Mount Adapter, the sb25aw can go anywhere and look sleek and unobtrusive doing it: pole from ceiling, pole from ground, onto any 75mm or 100mm VESA mount, and a number of pan-and-tilt wall and ceiling mounts from Adaptive Technologies.


  • Extruded and Machined Aluminum Construction with Perforated Stainless-Steel Grille Designed for Indoor and Outdoor Use
  • Available in Full Weatherized Black or White Finishes
  • 2 x 5-inch Theory Carbon Fiber LF Drivers
  • 1 x 1.4-inch Theory AdvancedPoly High Frequency Com­pression Driver on 125-degree Axisymmetric Waveguide
  • Maximum 117 dB/1m from Enclosure Only 3.8 inches Deep
  • Ultra-Wide 125-degree Conical Coverage (160 degrees @10 kHz, –12 dB)
  • 4-ohm or 70V/100V Operation
  • Included Accessories: Z-Clip Mounting Brackets (male and female) for Flat Surface Mounting, Waterproof Terminal Cover
  • Optional Accessories: Yoke Mount Bracket, Tabletop Stand, Universal Mount Adapter for Pole, Vesa 75/100mm Mount Holes, Ceiling and Wall Pan-and-Tilt Third-Party Mounts.

The sb25aw is available now. For more details, specifications, drawings, and measurements of the sb25aw, click here.

For more information on Theory Audio Design, visit