Tripp Lite’s B302-series matrix switch/splitters with audio extractor, multi-resolution support, and IP access connect HDMI source devices, such as laptops, Blu-ray disc players, video game systems and cable/satellite boxes, to multiple HDMI-enabled monitors, televisions, or projectors. Models are available with four HDMI inputs and outputs (4×4) and eight HDMI inputs and outputs (8×8). The same or different content can be shown on connected displays.
The matrix switch/splitters support high dynamic range (HDR) signals and true 4K video resolutions up to 4096 x 2160 at 60 Hz. Multi-resolution support allows video to be shown at the highest resolution of each individual monitor, rather than the lowest common resolution.
Users can switch between connected video sources using the front-panel buttons, the included IR remote, RS-232 serial commands, or control software. The switch/splitters can save up to 12 source/display combinations. For remote access to the software graphical user interface (GUI), users can configure their network to match the switch/splitter’s pre-assigned IP address.
Key Features of Tripp Lite’s 4K HDMI Matrix Switch/Splitters
- 4×4 and 8×8 models with audio extractor
- Ability to mix and match HDMI video sources and displays
- Support for true 4K video resolutions up to 4096 x 2160 at 60 Hz
- User-friendly switching between sources
- Pre-assigned IP address to support remote access
For more information, visit tripplite.com.
