Atlanta, GA — As a follow-up to the introduction of its TITAN 1080p-3D at ISE Europe, Digital Projection International has added a complete range of products with active 3D capability to its TITAN, LIGHTNING, and iVision product families.
DPI is offering two active 3D projectors in its single-chip projector lineup — the iVision sx+ 3D that is equipped with a standard zoom lens, and the iVision sx+W-3D, which is equipped with a short-throw-ratio fixed lens. Both products are compact and lightweight, feature a durable Magnesium cabinet and weigh in at roughly seven pounds with lens. The iVision 3D’s size, weight, SXGA+ native resolution and Brilliant ColorTM imaging make them great solutions for portable 3D applications and for permanent 3D installations with smaller screens.
The new TITAN 3D product range is comprised of eight distinct projectors. All eight units feature Texas Instruments’ three-chip DLP technology with fast transit pixels for smooth grayscale and improved contrast. In the 3D configuration, the award winning TITAN chassis houses DPI’s wide bandwidth active 3D electronics, which support sources running up to 120 Hz vertical refresh rate. The TITAN 3D models are available with either SXGA+ (1400 x 1050) or 1080p (1920 x 1080) native resolution. Both the native SXGA+ and 1080p platforms are offered as either dual or single lamp models, and each of the two lamp configurations can be further ordered as a High-Brightness or Ultra-Contrast configuration. When all 8 models are considered in total, the TITAN 3D product line presents a comprehensive array of active 3D display options, with brightness up to 9,000 ANSI lumens and a contrast ratio up to a spectacular 5000:1.
For active 3D applications demanding the highest lumen performance, DPI’s new LIGHTNING 3D offers the same source compatibility and imaging capabilities as the TITANs, while producing up to 21,000 ANSI lumens and 4000:1 contrast. Both High-Brightness and Ultra-Contrast versions of the LIGHTNING 40iSX+ 3D and LIGHTNING 1080p-3D are available, yielding a total of four powerful LIGHTNING 3D models from which to choose.
TITANs and LIGHTNINGs have been designed to be robust and extremely quiet, for a variety of immersive applications, including: military simulation, scientific visualization, motion-based entertainment, commercial cinema, and theme park attractions. In addition to the active 3D capability, the TITAN 3D and LIGHTNING 3D models also include DP’s new FastFrame technology, which is a combination of hardware and firmware that is designed to reduce artifacts and image blur typically associated with rapidly moving displayed content. The benefits of FastFrame are especially important for simulation environments such as commercial and military flight training, and other applications where the maintaining the visual integrity of high-speed imagery is vital.
Visit: www.digitalprojection.com
