AVPro Edge has introduced the AC-MXNET-10G-MSE, a 10G multi-stream encoder that simplifies AV over IP video distribution system design and implementation. The MXnet 10G-MSE enables integrators to design true hybrid video distribution systems from a single endpoint. By generating uncompressed 4K SDVoE video for 10G environments alongside a simultaneous H.265 stream compatible with MXnet USP, the new hybrid encoder allows integrators to bridge high-performance 10G systems with scalable IP streaming architectures. This dual stream approach simplifies system design, reduces hardware count, and lowers overall integration costs while preserving premium image quality where it matters most. The MXnet 10G-MSE is available now.
Leveraging the MXnet 10G ecosystem, the 10G-MSE delivers visually lossless, zero-latency 4K video to primary displays and, at the same time, produces a parallel 1080p H.265 stream that can be distributed to MXnet USP endpoints leveraging the power of AVPro Flow. With this tool, AV integrators can leverage the right level of performance for each space without duplicating sources, encoders, or infrastructure. The result is a more efficient system design with reduced installation costs and simplified long-term maintenance.
Key features include:
- Multi-Stream Engine — The 10G-MSE can transmit two streams onto the network simultaneously. The main SDVoE output provides high-fidelity 4K distribution to 10G-TCVR decoders, and a secondary H.26x stream provides low-bandwidth 1080p interoperability with MXnet USP decoders.
- 4K/60fps Encoding — Capable of encoding via SDVoE up to 4K/60fps 4:4:4 8-bit YCbCr or RGB source content with support for 10/12-bit deep color formats including HDR10, HLG and Dolby Vision. (Note: DV/HDR/HLG is not supported on the H.265 stream).
- Zero Compression — SDVoE distributes completely uncompressed video signals up to 4K/30fps 4:4:4 8-bit. 4K resolutions above 30fps are very lightly compressed at a 1.3:1 ratio, resulting in a signal almost identical to source content.
- Zero Latency — 10G endpoints distribute AV content over the network with zero latency when in genlock mode.
- USB & Control — 10G endpoints are equipped with various control signal I/O. Using the powerful MXnet API, integrators can route USB and control signals over the network to control peripherals or create KVM matrix systems.
For more information, visit avproedge.com.